A Texas summer means high temperatures, which puts more strain on your roof than the average year in other country areas. Therefore, it’s essential to ensure that your roofing and construction in Texas can withstand the heat, so you don’t end up with a leak that can lead to mold or other problems.
How can you ensure that your roof is good to go? Here are some tips for roof inspection near me to ensure your roof can handle the Texas summer.
Every roofing system is vulnerable to leaks, which is why many require regular inspections. For example, suppose you live in a home with an asphalt shingle roof. In that case, you’ll want your professional inspector to check for gaps at flashing corners and around attic vents, pipes, chimneys, skylights, and other penetrations.
It would help if you did these inspection visits twice per year—springtime, before high summer hits, then again when it’s time for your fall/winter maintenance plan. It’s also important to note that poorly installed flashing or improper ventilation could cause damage over time, so keep an eye out for any signs of trouble.
When it comes to roof ventilation, there are two ways of looking at it. The first is airflow: how many cubic feet per minute (CFM) of air is flowing through your roof. Ideally, you want somewhere between 40-60 CFM airflow through your attic and space.
The second way of looking at ventilation is whether or not your home has enough soffit vents, ridge vents, etc. There should be at least one vent for every 300 square feet roof area. If you have less than that, consider adding more to increase airflow throughout your house. You may also need to add additional insulation if you’re lacking proper ventilation.
This will help with energy efficiency and prevent ice dams from forming on your roof during the winter months. An ice dam forms when the snow melts around a stagnant section of your roof and then refreezes.
This creates an unsafe situation as water backs up behind the ice dam into your attic. To avoid potential problems, make sure you have proper ventilation before cold weather hits Texas.
Inspections and Warranty
Though you may hire a contractor to do your roof installation, it’s worth researching roofers yourself before you make your decision. One of the most important things you can do is find out what kind of warranty they offer—and don’t be afraid to ask why it’s there. A good warranty should last anywhere from 20-50 years, though you’ll also want to see which roof parts are covered.
Inspections are equally important, especially if you live in an area that regularly experiences hurricanes or other extreme weather events. If possible, have a professional roof inspection done annually by a licensed inspector; at least then, you’ll know whether or not your roof will stand up to Mother Nature if she decides to throw her worst at it.
If you notice water spots on your ceiling or leaks have begun forming around nails or other fasteners on your roof, it might be time to call a professional for a roof inspection near me. You should also inspect your roof at least once yearly and after extreme weather events.
If you spot damage like this, it’s best to get a professional opinion right away—don’t wait until there’s more serious damage. A simple repair could save you thousands of dollars and headaches from your roof leaking or caving in.
Maintenance is Key
Just because you had your roof replaced last year doesn’t mean you should put off checking it again until next spring. Instead, take some time between intervals of the month to review whether there are any signs of deterioration or wear.
Look for things like loose shingles, curling asphalt paper, or peeling coatings; these are all signs that your roof might need attention sooner rather than later. Have an experienced contractor inspect your roof if you notice anything unusual. Roofing and construction in Texas is something you don’t want to ignore and could save you from costly repairs down the road.